Description
The versatile PX series power amplifiers lineup combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 300W x 2 at 8Ω / 500W x 2 at 4Ω.
Features
- High power and efficient design: 500W (Stereo, into 4Ω)
- Driven by a newly developed Class-D amplifier engine.
- Stable 2-ohm drive capability.
- Supremely efficient amplifiers with low noise, reliable protection features.
- Amp Mode allows the user to configure the system without difficulty by selecting the input routing and output routing.
- Sophisticated signal processing allowing users to achieve consistent clarity and high-quality sound for either front-of-house or monitor configurations.
- Eight programmable presets for instant recall and reduced setup time that can be saved to a USB thumb drive and shared with other PX amplifiers.
- Presets specifically tuned for each model in Yamaha’s extensive lineup of passive speakers.
- A variety of input and output terminals.
- Panel locking function to keep your settings safe.
Specifications
PX10 |
PX8 |
PX5 |
PX3 |
||
---|---|---|---|---|---|
100V models | |||||
Output power; 1kHz Non-clip 20msec Burst Both channels driven | 8Ω | 1000W x 2 | 800W x 2 | 500W x 2 | 300W x 2 |
4Ω | 1200W x 2 | 1050W x 2 | 800W x 2 | 500W x 2 | |
2Ω | 700W x 2 | 600W x 2 | 500W x 2 | 300W x 2 | |
8Ω/Power Boost Mode | – | – | 800W x 1 | 600W x 1 | |
4Ω/Power Boost Mode | – | – | 1200W x 1 | 1000W x 1 | |
120V models | |||||
Output power; 1kHz Non-clip 20msec Burst Both channels driven | 8Ω | 1000W x 2 | 800W x 2 | 500W x 2 | 300W x 2 |
4Ω | 1200W x 2 | 1050W x 2 | 800W x 2 | 500W x 2 | |
2Ω | 700W x 2 | 600W x 2 | 500W x 2 | 300W x 2 | |
8Ω/Power Boost Mode | – | – | 800W x 1 | 600W x 1 | |
4Ω/Power Boost Mode | – | – | 1400W x 1 | 1000W x 1 | |
220V-240V models | |||||
Output power; 1kHz Non-clip 20msec Burst Both channels driven | 8Ω | 1000W x 2 | 800W x 2 | 500W x 2 | 300W x 2 |
4Ω | 1200W x 2 | 1050W x 2 | 800W x 2 | 500W x 2 | |
2Ω | 700W x 2 | 600W x 2 | 500W x 2 | 300W x 2 | |
8Ω/Power Boost Mode | – | – | 800W x 1 | 600W x 1 | |
4Ω/Power Boost Mode | – | – | 1400W x 1 | 1000W x 1 | |
General specifications | |||||
Sampling frequency rate | Internal | 48kHz | 48kHz | 48kHz | 48kHz |
A/D D/A Converters | AD/DA: 24-bit linear, 128 times over sampling | AD/DA: 24-bit linear, 128 times over sampling | AD/DA: 24-bit linear, 128 times over sampling | AD/DA: 24-bit linear, 128 times over sampling | |
Total harmonic distortion | 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) | 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) | 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) | 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) | |
Frequency response | ±1.0dB (1W, 8Ω, 20Hz to 20kHz) | ±1.0dB (1W, 8Ω, 20Hz to 20kHz) | ±1.0dB (1W, 8Ω, 20Hz to 20kHz) | ±1.0dB (1W, 8Ω, 20Hz to 20kHz) | |
S/N ratio | 101dB (A-weighted, 8Ω, Gain setting = +14dBu) | 101dB (A-weighted, 8Ω, Gain setting = +14dBu) | 100dB (A-weighted, 8Ω, Gain setting = +14dBu) | 100dB (A-weighted, 8Ω, Gain setting = +14dBu) | |
Crosstalk | Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) | Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) | Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) | Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt) | |
Voltage Gain/Sensitivity | 8Ω Volume max | 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu) | 32.0dB/+8.3dBu (Gain setting: 32dB), 26.0dB/+14.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) | 32.0dB/+6.3dBu (Gain setting: 32dB), 26.0dB/+12.3dBu (Gain setting: 26dB), 34.3dB/+4dBu (Gain setting: +4dBu), 24.3dB/+14dBu (Gain setting: +14dBu) | 32.0dB/+4.1dBu (Gain setting: 32dB), 26.0dB/+10.1dBu (Gain setting: 26dB), 32.1dB/+4dBu (Gain setting: +4dBu), 22.1dB/+14dBu (Gain setting: +14dBu) |
8Ω Volume max /Power Boost mode | – | – | 34.0dB/+6.3dBu (Gain setting: 32dB), 28.0dB/+12.3dBu (Gain setting: 26dB), 36.3dB/+4dBu (Gain setting: +4dBu), 26.3dB/+14dBu (Gain setting: +14dBu) | 35.0dB/+4.1dBu (Gain setting: 32dB), 29.0dB/+10.1dBu (Gain setting: 26dB), 35.1dB/+4dBu (Gain setting: +4dBu), 25.1dB/+14dBu (Gain setting: +14dBu) | |
Maximum input voltage | +24dBu | +24dBu | +24dBu | +24dBu | |
Input impedance | 20kΩ (Balance), 10kΩ (Unbalance) | 20kΩ (Balance), 10kΩ (Unbalance) | 20kΩ (Balance), 10kΩ (Unbalance) | 20kΩ (Balance), 10kΩ (Unbalance) | |
I/O Connectors | Speaker output ports | Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4″ PHONE(TS) x2 | Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4″ PHONE(TS) x2 | Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4″ PHONE(TS) x2 | Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4″ PHONE(TS) x2 |
Line Input | XLR-3-31 x2, 1/4 “PHONE(TRS) x2 | XLR-3-31 x2, 1/4 “PHONE(TRS) x2 | XLR-3-31 x2, 1/4 “PHONE(TRS) x2 | XLR-3-31 x2, 1/4 “PHONE(TRS) x2 | |
Others | USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp | USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp | USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp | USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp | |
Indicators | POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature | POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature | POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature | POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature | |
Processors | Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 – 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) | Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 – 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) | Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 – 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) | Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 – 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ + Limiter + Delay) | |
Latency | 1.5 msec (Analog Input to Speakers) | 1.5 msec (Analog Input to Speakers) | 1.5 msec (Analog Input to Speakers) | 1.5 msec (Analog Input to Speakers) | |
Presets | 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) | 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) | 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) | 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers) | |
Protection circuit | Load protection | POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) | POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) | POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) | POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically) |
Amplifier protection | Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) | Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) | Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) | Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically) | |
Power supply protection | Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown | Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown | Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown | Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown | |
Amplifier class | Class D, Balanced output circuit (BTL) | Class D, Balanced output circuit (BTL) | Class D, Balanced output circuit (BTL) | Class D, Balanced output circuit (BTL) | |
Cooling | 16 step variable speed fan x 2, front to rear airflow | 16 step variable speed fan x 2, front to rear airflow | 16 step variable speed fan x 2, front to rear airflow | 16 step variable speed fan x 2, front to rear airflow | |
Power requirements | Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. | Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. | Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. | Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage. | |
Power consumption | 310W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling) | 280W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling) | 230W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) | 160W (1/8 MAX power, 4Ω, Pink noise at all channels), 55W (4Ω, Idling) | |
Dimensions | W | 480mm (18-7/8″) | 480mm (18-7/8″) | 480mm (18-7/8″) | 480mm (18-7/8″) |
H | 88mm (3-7/16″): 2U | 88mm (3-7/16″): 2U | 88mm (3-7/16″): 2U | 88mm (3-7/16″): 2U | |
D | 388mm (15-2/8″) | 388mm (15-2/8″) | 388mm (15-2/8″) | 388mm (15-2/8″) | |
Net weight | 7.4 kg (16.31 lbs) | 7.2 kg (15.87 lbs) | 6.9 kg (15.21 lbs) | 6.9 kg (15.21 lbs) | |
Accessories | USB cover, Owner’s Manual, Specification sheet, AC cable (2.0m) x 1 | USB cover, Owner’s Manual, Specification sheet, AC cable (2.0m) x 1 | USB cover, Owner’s Manual, Specification sheet, AC cable (2.0m) x 1 | USB cover, Owner’s Manual, Specification sheet, AC cable (2.0m) x 1 | |
Others | Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C | Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C | Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C | Operating Temperature: 0°C to +40°C, Storage temperature: -20°C to +60°C |