[ CINEMA DESIGN SERVICE ]

Home Cinema
Design Adelaide

The best cinemas are decided on paper. We design your room to the CEDIA/CTA RP22 immersive audio guidelines and Dolby Atmos layouts: seating, sightlines, screen, speakers, acoustics and equipment, delivered as a drawing set your builder can work from.

AT SCREEN 3.18 MLCRSUBSUB46°RISER +350MLPTFRTRR5.20 M6.60 M3.77 M VIEWINGINVISION HOME THEATRECINEMA DESIGN · PLAN VIEWEXAMPLE ROOMLAYOUT7.2.4 ATMOSCEDIA/CTA RP22SHEET01 / 04
The standardRP22

Designed to the CEDIA/CTA recommended practice for immersive audio, not guesswork.

The formatDolby Atmos

Layouts from 5.1.2 media rooms to 9.2.6 multi-row cinemas and beyond.

The experience100+ cinemas

Designed and built across Adelaide since 2015, from family media rooms to reference rooms.

[ WHY DESIGN FIRST ]

A great cinema is decided
before anything is installed.

Most of what makes a room look and sound right is geometry: where the seats sit, how far they are from the screen, where every speaker goes and how the room is treated. Get that wrong and no amount of expensive equipment will fix it.

Get it right on paper and everything after is easier. Your builder knows exactly where the risers, cavities and cables go, nothing gets chased into finished walls, and the final calibration has a properly laid-out room to work with.

[ THE DRAWING SET ]

Four sheets.
Everything your builder needs.

Every design is delivered as a set of drawings and schedules, not a sales brochure. Here is what is in it.

Room & seating

Seat positions, row spacing and riser heights planned around your room, so every seat has a clear view of the whole screen.

  • Seating plan and row spacing
  • Riser heights and step positions
  • Sightline checks from every seat
  • Door, window and walkway clearances
Sheet 01 / 04Invision

Speaker plan

A Dolby Atmos layout drawn to the room, with every bed, height and subwoofer position marked for the builder.

  • Bed and height speaker positions
  • Angles checked from each seat
  • Subwoofer placement for even bass
  • In-wall, on-wall or behind-screen mounting
Sheet 02 / 04Invision

Screen & projection

Screen size, aspect ratio, viewing distance and projector throw worked out together so the picture fills your view.

  • Screen size and aspect ratio
  • Viewing distance and angle
  • Projector model and throw position
  • Light control and reflections
Sheet 03 / 04Invision

Acoustics & calibration

Treatment, isolation and the calibration plan that takes the finished room from good to properly tuned.

  • Acoustic panel layout
  • Isolation and noise control
  • Equipment list and rack plan
  • Calibration with Trinnov, Dirac or ARC
Sheet 04 / 04Invision
[ THE STANDARD ]

Designed to
RP22.

RP22 is the immersive audio design practice published by CEDIA and the Consumer Technology Association. Instead of “sounds good to me”, it sets measurable targets for how a home cinema should perform and grades rooms across four levels, from entry to reference.

We use it as our design framework on every cinema, so you know what performance your room is designed to deliver before a single cable goes in.

RP22 · Design parametersWhat we plan for
01

Playback level

How loud the system can play cleanly at every seat, without strain or distortion.

Our approach

We size speakers and amplification to the room volume and seating distance, not to a brochure.

02

Bass consistency

How even the bass is from seat to seat. Most rooms have big peaks and dips.

Our approach

Subwoofer count and positions are modelled for the seats, then tuned with room correction.

03

Speaker coverage

Whether every seat sits inside each speaker's coverage, not just the middle one.

Our approach

Angles are checked from the front and back rows before a speaker position is locked in.

04

Immersive layout

How many bed and height channels the room needs to place sound around and above you.

Our approach

We match the Atmos layout to the room size and rows, from 5.1.2 up to 9.2.6 and beyond.

05

Background noise

How quiet the room is before the film starts: air conditioning, equipment and outside noise.

Our approach

Isolation, quiet ducting and a ventilated rack location are planned in at design stage.

06

Calibration

Measuring the finished room and tuning levels, timing and frequency response.

Our approach

We calibrate every room with Trinnov, Dirac or ARC and measure across all the seats.

1Entry
2Enhanced
3Premium
4Reference
[ DOLBY ATMOS ]

Which layout suits
your room?

Atmos adds speakers above you as well as around you. The right number depends on the size of the room and how many rows you have.

5.1.2Dolby Atmos

Media room

Five ear-level speakers, one subwoofer and two overhead speakers. Big-film sound in a room that still works for everyday living. See Media Room →

Typically rooms up to about 4 × 5 m · one row
7.2.4Dolby Atmos

Dedicated cinema

Side and rear surrounds, two subwoofers and four overhead speakers. The sweet spot for most dedicated cinemas we design. See Dedicated Cinema →

Typically around 4.5 × 6 m and up · one to two rows
9.2.6Dolby Atmos

Custom & reference

Front wides and six overhead speakers fill the gaps, so sound moves smoothly around and over every row. See Custom Cinema →

Typically around 5 × 7 m and up · two or more rows
Ear-level speakerOverhead speakerSeat

Starting points only. Every room is calculated individually, and larger rooms can go well beyond 9.2.6.

[ FROM DRAWING TO ROOM ]

The plan, built.

Woodville cinema at frame stage with tiered risers built and plasterboard going up
Frame stageRisers + cavities
Finished Woodville cinema with two rows of recliners and gold-and-black wallpaper
HandoverWoodville · The Vault
→

Woodville: an 8 × 7 m upstairs cinema with isolated risers, planned around the speaker cavities and sightlines before the plasterboard went up. See the full project, or look at Dernancourt and Springfield.

[ EQUIPMENT ]

Brands we design with.

We are not tied to one brand. We recommend equipment we have installed, calibrated and lived with, matched to the room and the budget.

Processing & room correction
  • Trinnov
  • Anthem
  • Integra
  • Marantz

Trinnov for reference rooms. Anthem ARC, Dirac and Audyssey-equipped processors for the rest.

Speakers
  • Krix
  • Ascendo
  • Triad
  • Monitor Audio

Chosen for the room size and how they'll be mounted: behind the screen, in-wall or on-wall.

Subwoofers
  • Ascendo
  • SVS

Sealed and high-output designs, positioned and tuned for even bass across the rows.

Projection
  • JVC
  • Sony
  • Epson

Laser projectors matched to screen size, room light and budget.

Seating
  • Halo

Halo cinema recliners, planned around riser heights and sightlines. See the range.

Control & automation
  • RTI
  • TIS
  • Shelly

One button to start the film: lights, screen, projector and sound together.

[ HOW TO WORK WITH US ]

Design only,
or design and build.

Option A

Design only

Building with your own builder, or just want it planned properly before you commit? You get the complete drawing set to build from.

  1. Room visit or plan review
  2. Design consultation and brief
  3. Full drawing set and equipment list
  4. Walk-through with you and your builder
Request a design quote
Option B

Design & build

We design it, build it and calibrate the finished room against the drawings. One team from first sketch to the first film.

  1. Design and drawing set
  2. Pre-wire and construction with your builder
  3. Install, fit-off and commissioning
  4. Calibration and handover
Start your cinema
[ FAQ ]

Cinema design,
explained.

Common questions about our design service. Still unsure? Ask us directly.

Yes. The design service stands on its own. You get the drawings, layouts and equipment list to build with your own builder, or to bring back to us for the install.

RP22 is the CEDIA/CTA recommended practice for immersive audio design. It sets measurable performance targets for a home cinema, such as clean playback level, bass consistency, speaker coverage and background noise, and grades rooms across four levels.

It depends on the room size and how many rows you have. Smaller media rooms suit 5.1.2, most dedicated cinemas suit 7.2.4, and larger multi-row rooms suit 9.2.6 or more. We work it out from your actual room.

Before the room is framed, if you can. Riser heights, screen wall depth, speaker cavities, isolation and cabling are all far easier to get right at design stage than to fix later.

Yes. Many of our cinemas are in existing rooms, and the design works with what is there, including awkward shapes, windows and doors, like our Dernancourt cinema.

It depends on the size and complexity of the room. We give a fixed quote for the design once we have seen your plans or the room.

[ START WITH THE DRAWINGS ]

Send us your room.
We'll design the cinema.

Plans, photos or rough measurements are enough to start. We will come back with a fixed quote for the design.